Concrete screed on the street

Concrete screed on the street

How to make concrete screed: types of reinforcement. Layout and installation of lighthouses. Preparation of the solution

Every floor covering requires a smooth and permanent foundation. On the other hand, according to the majority of experts, the most reliable basis is concrete screed. As a rule, its regulation does not give rise to serious problems, and any person who has initial skills in the construction industry will be able to cope with this work. But before you do a concrete screed with your own hands, it's still worth knowing about the process's difficulty.

Concrete screed on the street

Concrete screed on the street?

Now I have a house near the house on the side where the veranda is 1.5 m.
It looks like it - photo attachment.
eg. just before our eyes on a kind of earth with dirty sand
Generally, I want to get a smooth, smooth, permanent road.
The tile obviously disappears, because on this basis, since the layers are moving in winter, everything will break apart
I go to this base, thoroughly clean, fill and polish screw 10 cm with reinforcement on top?
What do you say?
I want to add to MB 10-01 and waterproof.

Concrete screed on the street

List of materials: screed

If you have managed to buy garden land, then you can not do it without a screed device on the street. These are the tracks on the plot and the blank area around the house and the floor in the garage and, if possible, the ground on the first floor or cellar. On-road screeds have increased requirements, both due to permanent climatic effects and the increased operational load. However, the plastering of sheet metal can replace the street.

Concrete screed on the street

How to make a concrete screed

In the concrete screed there are two main components: binder and filler. Portland cement works as a binder in the production of screeds. Its content in the mixture reaches 15%, depending on the thickness of the layer.

Concrete screed on the street

How to make concrete screed on the street?

Upon receipt we will contact you to clarify the type of advisory services and other terms of the order. The amount of work and consultation costs will be evaluated and the terms of the contract will be sent to the address you provided. We agree with the method of payment with you and provide an invoice and payment details. You must pay the order.

How to swim the concrete pool

How to swim the concrete pool

How to build a swimming pool with your own hands - we create a concrete pool in the country (detailed instructions)

Paraphrasing classical, we can say that the device device in the house, in the garden or in the country - this is not a luxury, it is a necessity.

How to swim the concrete pool

How to fill a concrete pool

You decided to build a swimming pool and a good one, not for a prefabo and one that will impress you not only for one season, but for many years. The most common and inexpensive option for building a concrete pool with your own hands on your website is of course a concrete concrete pool. You know the building technology, but there are questions about casting concrete so that it does not burst, does not break down and served without major repairs for at least 5 years.

How to swim the concrete pool

Concrete basin orders me alone

Swimming pool construction is not the easiest thing to do, especially if it's a concrete pool. However, with some skill in building, as well as with extraordinary patience, you can create rest on your site. In hot weather, the pool will become a place to relax and at the same time decorate the appearance of the city. The pool will look great next to the stone garden, the alpine slide and other decorative elements of the garden. In this article, we will explain how to build a concrete swimming pool with own hands, step-by-step instructions, as well as video and photo materials.

How to swim the concrete pool

The simplest technology of building a concrete basin in a country with its own hands

But if you have already come into contact with engineering and construction work, why do not you move to a higher level and do not build a concrete pool with your own hands? We will then explore more options for building a swimming pool, but now we will pay little attention to the advantages and disadvantages of the pool at dachi.

How to swim the concrete pool

Do-it-yourself pool: features of your own concrete

You can build a swimming pool yourself in two ways: in the first case a final cup is purchased and installed, and in the other, the pool is poured out of concrete. The second version of the pool is cheaper, although work seems a lot more. In this article, together with the stroisovety.org website, we will consider building a swimming pool in another way - we will thoroughly examine the sequence of work and focus on the thin possibilities of their implementation.

Formation for the foundation for the purchase

Formation for the foundation for the purchase

Block concrete fixed sheathing (double-sided chip)

KompaniyaUKRMETALL has warehouses with building materials throughout Kiev. For more detailed information, please call +380681687576.

What is a permanent trail for the foundation: price, advantages and disadvantages

Several revolutions have resulted in the emergence of polystyrene blocks, the costs of which, although not low, are due, but because of the effect obtained through their use, their application is fully justified.

Drained drainage for the basis, type and price

When building a private developer, he will have to face up to ten companies that produce fixed sheathing. A large number of companies are domestic producers, many of whom successfully refine standard technologies. The owner can choose the appropriate system.

Formation for the foundation for the purchase

Description of BVESS (Rapid Power Repair System).

Thermocouple or foam concrete block

Indeed, today is the issue of energy savings. Modern technologies in the construction sector are especially needed. Only one way to save heat is to use thermal blocks. These modern materials have been successful in building housing. This is a hollow mud with voids. Material for their production - penostrol. Foam concrete blocks have high consumer qualities. Their advantages are: high degree of thermal and sound insulation, does not absorb moisture, has high fire performance.
Also, the great advantage of these blocks is that in the process of their installation all gaps are sprinkled with a concrete solution. This allows you to build a structure that can withstand strong external loads (earthquakes, hurricanes).
Structurally, thermo-blocks are fixed formwork, which makes it possible to build the buildings of any configuration, without having to spend a lot of effort.
By using thermocouples you get not only aesthetic but also economic effect!

Formation for the foundation for the purchase

Overview of companies with prices

The building panel is an auxiliary element used for the construction of various structures from construction solutions: concrete, soil mixtures, etc. It is made of metal or wood, made of formwork and fasteners.

The base of the lure

Manufacture of wood foundations

Foundations of wood - a light construction that is not suitable for building houses, but is an excellent base for greenhouses, wooden halls, etc. Such a foundation has many advantages, of which the easiest implementation is the most important.

The base of the lure

Foundation for wood greenhouse wood: recommendations by masters

A greenhouse or a greenhouse is of course a fixed structure, but experts know that they need to be relocated regularly to rest in order to rest. Therefore, for every construction, even for heavy, it is impractical to install the stationary concrete base. The foundation bar under the vegetation - the perfect solution for folding buildings! You will restore the soil and you will notice the correct cycles of planting different crops.

The base of the lure

The foundation for the greenhouse of wood: design possibilities and rules for installation

The structures of light plants coated with polycarbonate or polyethylene do not require a solid foundation. The weight of the frame of the usual summer options is 70-80 kg. Therefore, it is unwise and not profitable to pour the concrete tape under its installation or build a brick substrate. This is much easier and much cheaper to build the foundations for greenhouse gas from the bar. Wood is an easier job for a domestic craftsman who is inexperienced in carpentry if he is acquainted with technological details and tannins.

The base of the lure

The foundation bar for the greenhouse

The basic base from the bar under the greenhouse gas is the simplest and the most affordable option of building a base. Despite its simplicity, it is very reliably performing the tasks of distributing the weight of greenhouse gases to the largest possible surface.

The base of the lure

Building a foundation bar under polycarbonate vegetation

The successful functioning of greenhouse structures in gardens depends to a large extent on the adequately designed foundation. For the construction of seasonal meetings with types of fine buried grants. They allow you to securely secure the frame and do not give the possibility of wind blows that can be transferred to the adjacent part. The foundation bar for a greenhouse from a polycarbonate factory or its own production refers to the most budgetary option. These technologies and the characteristics of the construction of some of its types, which we deal with in this article.

How to make floor screed with your own hands

Floor coverings: a short educational program on the device of various types of screed with their own hands

What is floor screed? This is a layer that serves as the basis for the soil in simple conditions. It is necessary for complete alignment of the floor and give a certain stiffness of the surface, the desired inclination and hidden accessories. Sometimes the screed can be a finishing surface, as in technical rooms.

How to make floor screed with your own hands

The "mokrega" frost sores

In any case, you must decide on the overall thickness of the screed and, more precisely, when using a cement or concrete screed that must be on the floor. It all depends on the type of overlap or the required value of thermal insulation and strength. The limitation can be as a screed on the floor, since this is the main technological part of the construction and consequently the load on the screed. In case of building a new building, the instructions of the construction project must be followed. If you want to build floor screed with your own hands instead of old pressure, you must take into account the characteristics of the old one and make it better by acceptable standards by adding insulation or, if necessary, underfloor heating.

How to build floor screeds: step-by-step instructions

Floor screed - repair phase needed. Many owners prefer this work to professionals. However, if you have the necessary knowledge and spare time, even a non-specialist can deal with it. In this article, we will describe in detail how to correctly create floor screeds and step-by-step instructions to help you master the technology.

How to make floor screed with your own hands

How to make floor screeds and why it is needed

Experienced experts argue that each of these methods is good enough to create a completely flat surface without any difference in height that is suitable for further installation of the final pressures. When to install floor screeds?

What is screed?

For some reason, when they hear the phrase "concrete screeds", many are horrifying. It seems to them that this process is both physically and mentally complex, so that it can only participate in such a professional way. But in reality, everything is much simpler and easier than it seems. In this article, we will try to convince everything and dismantle the myths that circulate around the "terrible and terrible" screed.

Prefab tape is the foundation of blocks fbs

Prefab tape is the foundation of blocks fbs

Preparing the foundation

The signs of a future trench or ditch on the basis of the planned dimensions are marked on the ground with corner hooks on which the cord is tied. Iron dummy at the center of the basement by 0.5-1.0 m.

Prefab tape is the foundation of blocks fbs

The foundation of the FBS blocks with its own hands: the device, the stages of work and the nuances of the construction

When the idea is born to build your own Russian bath, then everyone wants to be realized as soon as possible. And in fact it does not make sense to go in the most difficult ways - there are special construction technologies and methods that allow you to save not only time but also money. And among these - high-quality and not expensive assembly base PBS - with own hands, is built much faster than any other basis.

Prefab tape is the foundation of blocks fbs

The foundation of PBS blocks: technological devices of a durable base

The cost of the mortar for the pouring of the monolithic substrate slightly differs from the price of the final reinforced blocks labeled FBS. The economic advantages are reflected in the abandonment of the formwork and the delayed device of the cage. Owners who have decided to build the foundations of FBS blocks automatically eliminate the need to wait for a pleasant time. We have no reason to put off the construction of walls in a period which is equal to the period of the cast alloy solution. Moreover, the economic variant of the base is not in any way worse than the monolithic power strap if the technological regulations were strictly observed.

Prefab tape is the foundation of blocks fbs

Device on the trunking blocks

These are structural elements that form a fundamental construction. The most popular concrete blocks are FBS manufactured in the concrete products factory that ensures compliance with the requirements for high quality products: the precise ratio between the proportions of the components of the mixture, the reinforcement, the overflow of high quality concrete and further vibropressing for the highest density, the steam in special chambers and the final consolidation of concrete .

Prefab tape is the foundation of blocks fbs

Do the foundation of the FBS blocks yourself

The main disadvantage: it is not monolithic because it can not be placed everywhere and not always. Usually, there are preliminary bands from the blocks on the dry, which are not prone to bleeding the soil. Under other conditions, a calculation is needed and an expert is better.

Gambling fees

Gambling fees

INSTALLATION GABION

Over time, the structures are filled with soil and covered with permanent grasses that hide the artificial origin of the object. Gabion fences are often decorated with climbing plants, which become important elements of the outer decor. The humidity permeability of gabion structures eliminates the formation of hydrostatic loads. Similarly, the relationship between surface and groundwater remains unchanged, so the soil is rinsed and is not salted.

Gambling fees

Mounting gabions: fast, profitable, reliable!

An additional advantage of gabion constructions is that the inventors have managed to combine the practicality and aesthetics of products: the metal mesh is recognized as an economical and effective solution for strengthening the slopes, cones of bridges, a coastal strip that tolerates stability on car and railway embankments, supporting walls. In the landscape architecture, the installation of gabions will allow you to create the original landscape element and a high-quality alternative to static fences made of stone and concrete.

Gambling fees

Mounting gabions: just add ... stones!

The invention of gabions is attributed to Napoleon soldiers who used stone braids to protect against the target. Today, there are several types of metallic mineral filler containers that are used in land management and landscape technologies ....

Price for gabions (gabion structure)

For quite a long period, reinforced concrete blocks were the main fortification of banks and other facilities. The builders did not question their reliability and durability, but the high price of the first meter of such a construction seriously affected the financial position of potential buyers. When modern suppliers of geomaterials proclaimed the cost of gabions and explained their main characteristics and benefits, it seemed that prices for customers' gabions were not only profitable, but to save them as much as possible!

Gambling fees

Installation and installation of gabions

The use in the construction of gabions and their structures to date is becoming particularly popular. The thing is, the gabion structures are environmentally friendly products and eventually merges with the natural landscape and become one with it.

Composition of soil in bulk

Composition of soil in bulk

Sestava samorazlivnih tal

The main ingredient in the self-leveling soil composition is a polymeric binder consisting of a base and a hardener.
It is a binder that determines a set of basic properties of polymeric self-leveling floors: strength, resistance to wear, resistance to light, resistance to chemicals, elasticity, etc. - and thus also the scope of the appropriate polymer self-leveling floor.
Epoxy floors and polyurethane floors are most commonly used.

Composition of soil in bulk

Mixtures for self-leveling soil

Self-leveling self-leveling floors - one of the best options for flooring in the apartment or house. Self-leveling solutions are used as a basis for other material or as a self-leveling coating. The mixture for self-leveling soil can be poured into any room from the bedroom to the garage or workshop. The main thing - to choose the right mix. Their volume today is quite wide and combines coatings with different composition, surface structure and layer thickness. Each blend has its own characteristics, spillover technology and recommended scope.

Composition of soil in bulk

The composition of the self-leveling floor - do it yourself

First of all, because of its properties: moisture resistance, resistance to wear, resistance to temperature fluctuations and, of course, perfectly smooth surfaces.

Composition of soil in bulk

What is self-leveling soil and can be mixed with your own hands

By means of self-leveling mixtures, the soil is quickly and qualitatively leveled. For the price they are much more expensive than conventional mortar for cement sand. Can I do my own work with my own hands and what materials will be needed for this? You can find answers to these questions in our article.

Composition of soil in bulk

Structure and apparatus in bulk

Common soils are a group of materials used in bulk and used for leveling and protecting the substrate. Concrete and cement sand are suitable for rough alignment. Their thickness can be at least 3-4 cm. However, this thickness can be achieved only by reinforcing and using specific additives. Without reinforcement, the screed thickness is at least 7 cm. Self-leveling flooring is made if the screed can not be thicker than 3 cm.

How much does the color of the facade of the house cost?

How much does the color of the facade of the house cost?

Services

The appreciation of facades depends on the complexity of the design. If coloring involves the use of more than three different colors, the amount is increased. It also means the state of the surface. For buildings in neglected condition, cleaning and washing the walls before the application of the new coating is ensured. With additional services, the cost of painting the facade for 1 square meter will cost the customer more.

Painting facade. Costs of painting the facade of the building

To create an outward appearance of buildings that maintain their attractive appearance during the year, timely painting of the facade of the building is required.
High and low temperature, wind, humidity, rays, harmful substances in the air, other environmental effects have a negative effect on the surface, therefore the role of colored buildings reduces not only aesthetic but also protective functions. After all, on the surface of the walls there are fungi, molds, effusion (salt), stains and cracks. Particularly vulnerable are concrete and masonry walls (so-called wet facades).
How do I recommend painting specialists?

How much does the color of the facade of the house cost?

Façade painting technology

Facade - face of the building. Its appearance speaks about the taste, accuracy, and consistency of the owner. Quality linings affect the energy efficiency of your home. Coloring is performed so that it looks nice, its surface is not destroyed under the influence of natural factors and industrial emissions of companies. This is one of the cheapest and most effective ways of protecting buildings.

Facade painting

Costs of painting the façade include a number of key factors that determine the quality of the facade painting: 1) What do we do with our facade (roller or spray gun)? 2) Do we use scaffolding? 3) How many layers are we using? 4) What kind of texture is the color of the facade we want to get? 5) In what short period of time does the work take place? 6) Which workspace will we leave? 7) Can you recommend us your friends, your friends, your partners?

How much does the color of the facade of the house cost?

Painting the facade, the walls of the house outside

The color pack always contains information about ink consumption. Usually specify the specific use of façade paint - the number of liters (kg) you will need to paint 1m2 facade in one layer, l / m2.

Sizes of brick columns

Sizes of brick columns

Do the brick rods yourself

With the help of a combined fence it is possible to build a reliable and relatively cheap fence - the pillars are made of brick, filling (expanding) and light materials - wood, profiled sheet metal, forged fences. The view is solid and the costs are much smaller than the "clean" brick fence. Laying pillars is not the most difficult but profitable. Two years ago, craftsmen applied for 2000 rubles per pillar, but today prices have more than doubled. With a fence, it is possible to build brick pillars with their own hands and without the skill of a bricklayer. It's important to consider technology and everything will turn out to be.

Sizes of brick columns

The brick pillars

Elements of the internal framework of civil engineering with external brick walls can be reinforced concrete columns and brick pillars. Brick pillars, arranged from selected solid bricks to the solution of high brands. The minimum section of the supporting brick column (Figure 1, a) lasts 510 x 380 mm.

Sizes of brick columns

Construction of fences with brick pillars

This fact is explained by a simple example. Let's say that you put a concrete base under a fence with a brick pillar, and then you realized and decided to strengthen them with reinforcement. Time is missed because it will not be possible to place the frame in the laid concrete without destroying the integrity of the "tape".

Sizes of brick columns

Sizes of brick

The standardization of ligating systems and brick-based bricks contributes to the standardization of brick size. In the case of masonry walls without insulation or air openings, the wall dimensions correspond to the modular dimensions of the brick faces and the normalized thickness of the masonry joints. When shaping the dimensions of the brick pillars, walls and wall thickness, the width of the vertical wall joint is 10 mm (in practice 8-12 mm). In this case, two bricks laid by baking form a masonry part equal to the length of the brick laid with a spoon (120 mm + 10 mm + 120 mm = 250 mm).

Sizes of brick columns

Brick fences: constructional features

The brick pillars for stone, wooden, concrete and brick fences look very aesthetic and respectful. These foundation pillars are reliable, strong, beautiful and durable to charge heavy weight.