Bulkhead bulkheads

Bulkhead bulkheads

Partition plates of carbonated concrete blocks: walls, dimensions and thickness of partition concrete.

The first phase of the installation should start with marking. The line is drawn on the ground where the bulkhead will take place. Furthermore, a ruberoid ribbon is placed next to the marking line. The adhesive mixture should be applied to the roof material and to the area of ​​the joints of the ventilated concrete walls with a wall. The first type of bricklayers should be built on the level of the building. The wall should be connected to the partition wall by means of fasteners for iron, bent at right angles, fastened with anchors, screws. The partition walls of carbonated concrete are easy to mount, but this procedure requires a special bucket of the same width as the blocks.

Bulkhead bulkheads

Concrete blocks are made by themselves

It is often necessary to install partitions in the repair process, which is why more often use gas concrete (gas silicate). It is lightweight - sometimes weigh less than bricks, quick walls. Because the walls of concreted concrete are placed in apartments and houses, regardless of the load-bearing walls.

Bulkhead bulkheads

Prefabricated concrete partitions

Due to the increasing popularity of concrete concrete it is increasingly used in the construction of internal walls. The walls of concrete concrete can be thick 10 cm, 15 cm, 20 cm, density D500. This laying can be done on the ceilings and on the floor.

Bulkhead bulkheads

Interior partitions made of carbonated concrete blocks

Interior walls create comfort, share the house on functional zones. Carbonated barriers absorb noise from adjacent spaces, light, regular shape. They have more advantages over other building materials. You know the techniques of porous concrete work, you can quickly build partitions with your hands.

Bulkhead bulkheads

Blocks of carbonated concrete blocks (main grade)

The work in building partitions from the blocks with their own hands actually begins with the purchase of materials and additional elements. It is necessary to buy blocks, adhesive mortars, anchors and tools. Calculate the number of blocks is very simple: find out where the side area of ​​each block is, try on the surface of the wall and buy 3-4 blocks more than it turned out.

Installation of doors on metal doors

Installation of doors on metal doors

Do a good installation on the front door yourself: installation functions

Often in the process of installing the entrance door is necessary for installation good. Such a device allows you to almost perfectly and in combination with other elements create a seamless design. Think about how to do it yourself.

Installation of doors on metal doors

Proper installation of goods and tiles on the front door

Today's door replacement is the whole range of works. And for this, additional elements such as backing and trim are needed. And if the former slopes were pruned with cement mortar and paint, today such a moving structure is no longer used. The installation of door panels on the front door with subsequent tile design has come to the fore.

Installation of doors on metal doors

The possibilities of installing the garage on the front door and practical tips

Standard door frames, made today, have standard sizes. City suites have a wall thickness of about 7 to 8 inches. Therefore, the installation is not difficult. However, there are times when the wall thickness is much larger than the door. Entrance doors can be interrupted, finished with gypsum board, plastic panels. Ideal for finishing is the installation of door panels to the front door. They are special extensions of the same or similar material as the door itself, in one tone. Mounting plates of different lengths and widths are suitable for all openings.

Installation of doors on metal doors

Installation of the slopes of the front door

You can perform each of these options on your own and with the help of experts. You can install MDF slopes from a certified Torex brigade. In this case, we guarantee a high quality of work done. Since the installation of MDF slopes - the hardest and the longest, you need to know more shades. If you decide for yourself, use our instructions.

Installation of doors on metal doors

Placement of goods and tiles on the entrance metal doors

The new metal doors after installation require additional work in the design of the visible seams and the gap between the neck and the door frame. You can order a front door finish separately or include these parts in a comprehensive package for mounting and installing the door when you enter into a contract. The materials are MDF or solid wood corresponding to the door leaf tone.

How to pour a monolithic plate

How to pour a monolithic plate

Secrets and shades

In this article, we will make a monolithic plate between the first and second floors of our future huts. The suitability of such overlap occurs when the first floor or the entire cottage is stony and the size of the overlapping areas is not standard.

How to pour a monolithic plate

Monolithic ceiling alone

The monolithic panel has several advantages over the plates of precast reinforced concrete panels. First, the structure is solid and solid without a single seam that ensures a uniform load on the walls and foundations. Secondly, monolithic casting allows you to make the layout of the house more free as it can rely on the columns. The layout can also include as many angles and bumps as you would for which it would be difficult to select standard size floorboards. Thirdly, it is possible to equip a balcony without an additional panel, as the building is monolithic.

How to pour a monolithic plate

Properly plating the plate do it yourself

It should be noted that concrete floors are only possible in buildings with strong walls. Its spillage into houses with wooden walls is unacceptable, and in buildings with barriers of light materials, the monolithic plate can be poured only after additional steel or reinforced concrete supports are placed below it. In addition, buildings with such places should be built on solid ground and solid foundation. If the building you are building does not meet these conditions, you must discard the floorboard with concrete.

How to pour a monolithic plate

Construction of monolithic houses with final linings

The thickness of the panel is calculated from the width of the flying ratio 1:30 but not less than 150 mm. If the width of the span between the supporting walls is 6000 mm (6 m), the overlap must be filled with a thickness of 200 mm. Width width of more than 6 m must be reinforced with additional screws.

How to pour a monolithic plate

How to fill a seismic waist and a monolithic plate?

In building construction, the construction of monolithic reinforced concrete floors has been in use for more than a decade, and in the cottage relatively recently. Mostly private developers are wondering why monolithic or prefabricated monolithic floor boards, which are not supported by the amplifier band, are not deformed under the load. Thus, seismic bands are assigned the following tasks:

Tile under the machine

Tile under the machine

Laying of paving stones under the car

In addition to footpaths, they often need to lay paving stones in the places where the car is traveling. There may be parking lots, gas stations, parking, freight terminals, private areas with the possibility of traffic arrivals. What is the technology of stucco at places where it is possible to increase the load, is the FEM laying technology for cars different from pedestrians? Below we take into account all the nuances.

Tile under the machine

Paving under the car. How to pick?

The tiles for the interior decoration of the house and the paving of street tiles have their purpose. You have to admit that nobody is thinking about laying tiles of 10 cm thick in the kitchen, because this is not recommended. The external roof also has its own purpose and must withstand an appropriate load. For passenger cars, according to the production process, the pavement thickness must be at least 4.5 cm. When editing, do not forget the way for the arrival of special vehicles, for example, an asynchronizer.

Tile under the machine

Positioning of paving stones under the car: technology and surface requirements

The technology of laying paving under the car can be beneficial for anyone who has a private house or cottage. With the help of this versatile material, you not only improve the site, but also equip a convenient parking space. Let's take a look at how to do it in accordance with the basic rules and requirements.

Tile under the machine

Paving under the car

The technology of laying paving under the car can be beneficial for anyone who has a private house or cottage. With the help of this versatile material, you not only improve the site, but also equip a convenient parking space. Let's take a look at how to do it in accordance with the basic rules and requirements.

Tile under the machine

If you are a business

To create a parking lot it is better to use small size items (10 × 10 or 20 × 20). In cases where parking is not intensively used and the car has a low weight, 50x50 mm can also be used, which will greatly simplify the speed and installation costs. But the car can be changed and not the fact that in the future the coverage is to deal with the increased burden.

Wooden floor in the apartment

Wooden floor in the apartment

Wooden floor in the apartment

Calculate the required plate quantity. To do this, first determine the area of ​​the room. It is best to calculate it yourself, because the data listed in the residential data sheet often does not coincide with the actual data. Consequently, the area multiplies the plate thickness and produces the required amount. The plate is released in cubic meters, so you have to determine the cubic capacity. The remaining materials are calculated in current meters. In this case, if you want to determine the required quantity, it is sufficient to know the area of ​​the space and its dimensions.

Wooden floor in the apartment

In the apartment we put wooden floors

In the first case, the top layer of soil is previously removed and in its place a concrete mixture or clay-sand, which is 20 cm thick, is poured into its place. On this distance of one meter there is a brick layer 25 x 25 x 25, around which a waterproofing material, for example, expanded clay is placed around them). And already on the pillars of the brick are laying timber, which has logs and then laid the boards.

Wooden floor in the apartment

How to choose a material

Wooden floors, as in the picture, are very common in apartments and private houses, because they are not only decent in appearance but also reliable. To make the flooring of the apartment in the apartment not only beautiful but also durable, you have to choose the right material and make the installation according to the technology.

Wooden floor in the apartment

In the apartment we become wooden floor

The first method is simply the printing of boards with post-treatment of the surface of the coating, by the way, polishing, in which the removal of the wood layer takes place, thus obtaining a flat surface.

Wooden floor in the apartment

Materials: Once the floor plate is re-transferred

They took the roof larch, the economic class. only two panels were bats, and even then I love them. Leinos was a factory oil, a part for the terrace and a part for the interior. During the year there were no complaints, no special cracks, nothing cut or twisted, I did not try to wet them, wiped with a slightly damp cloth every couple of weeks, and the vacuum cleaner is time consuming. They were placed on plywood, and Zika on the adhesive, also on Zika (in the cave there are gaps where glue is used). The result is nothing. The substrate and glue are really expensive.

How to install a sandwich panel on the slopes

How to install a sandwich panel on the slopes

test Plastic windows.

As a rule, the repair in the apartment begins with the replacement of the old and further slopes of the devices for new plastic windows. There are several options. In this article, we will look at how to make slopes of sandwich panels with our own hands. The photos shown in the article clearly reflect the course of the action.

How to install a sandwich panel on the slopes

Damage from sandwich panels is done by yourself

The windows and doors in the house withstand the maximum load. From the street there are precipitation, winds, temperature drops, and inside there is another temperature, evaporation. All these factors lead to the rapid destruction of structures. The walls of the house stand for centuries, and windows and doors need to be changed. If we replace the window frames, we suggest that you immediately install the slopes of sandwich panels to get a completely new beautiful and modern window. You do not need a lot of time and special skills.

What is a sandwich panel

The completion of the compound material has been given the name due to its design. The panels consist of two or three layers. In the first case, it is a plastic foil and polystyrene-based insulation, and in the second, a decorative layer on both sides. Construction material with three-layer construction is more rigid and well preserved in shape. Extruded polystyrene foam is used as a heat insulator. The thickness of the panel is 10-32 mm. The color scheme of the decorative coating allows you to select the end, along with the design of the room.

How to install a sandwich panel on the slopes

Popular sandwich panels

In order for plastic windows to protect your home from all the unpleasant effects of the street, you need to make slopes, both exterior and interior. The internal slopes are necessary for the normal appearance of the window itself.

How to install a sandwich panel on the slopes

How to make slopes of sandwich panels themselves

The device of these slopes is in several stages. To increase the setting, the surface is first treated with a coating. Then apply several layers of plaster, each of which must be dried. Plaster is the cheapest but inefficient way to complete the slopes, since the lack of insulating properties of this end causes excessive cooling and further blurring of the windows. The plaster is applied with a mesh, and the gap between the window and the plaster must be sealed with silicone.

Thickness of the concrete ceiling cellar

How to make a ceiling in the basement - three options

The traditional wine cellar is arranged so that all of its rooms are below ground level. This design has many advantages: stable temperature throughout the year, free space on site, ability to store food. Covering the cellar at this location is on the ground or slightly higher.

Thickness of the concrete ceiling cellar

The monolith curts over.

A large communal building with a cellar of 6 × 4 meters is being built. The foundation of the blocks is ready. Now you have to overlap. Better, of course, hollow-hollow, but the problem is in the installation - at the top of the pipeline and wires .. It can buy concrete ready cheap. And now I think - whether it is possible to make a panel of 50 mm plates and oak stands, weld the reinforcement mesh and overflow the concrete. Will he be plastered? Will it cover with the voids "warmer" (all over the air in them)? What thickness should be monolithic overlap?

Thickness of the concrete ceiling cellar

How to make a cellar overlay?

The garage is not just a place to park cars and repair it. It can be equipped with another useful from the point of view of the household area - basement (or grocery store). As the cellar overlaps with its own hands, it will be a conversation. But the construction of the basement in the garage starts, just like any building, by laying the foundations. First, first.

Thickness of the concrete ceiling cellar

What is meant

It can not do without the countryside without a cellar. After all, this is the best way to keep the harvest and various conservation, and in addition, you can store garden tools and tools. However, in order for this structure to fulfill all necessary requirements and to be comfortable in doing so, a list of building materials should be specified. It is also important to consider the technology of installing the building. In this case, after the reading, the article will help to make it difficult for the concrete cellar to be built with its own hands.

Thickness of the concrete ceiling cellar

Concrete basement with own hands. Panels and bows

The flange is located along the inner perimeter of the monolithic concrete basement. To make support plates we use a panel with overlapping shields. Alignment and installation of metal corners will be much easier. The task of this device is to provide a uniform position to the ceiling line.

How thick should be floor screed

How thick should be floor screed

Choose the optimal floor screed thickness

The screed refers to the upper part of the floor structure, which serves as the basis for laying the decorative floor coverings. Modern renovation, carried out in a new building and in apartments of old high-rise buildings, necessarily involves work on the floor with a screed. In order to work independently on floor laying, you need to know which materials are needed and the thickness of the screed for your apartment will be optimal. The nature of the work will largely depend on the characteristics of the space and the desired features of the future floor.

How thick should be floor screed

Optimal thickness of screeds

Estrich as such is the "experimental" version of the soil, its draft version, on which the main plane of modern materials will be installed. The task of the screed is that the flooring is of the highest quality. In addition, esters are simply necessary for:

How thick should be floor screed

Minimum screed thickness

The question of the smallest possible thickness of flat cement floor screed is of many concern. After all, if you start to make screeds with the highest point of the space with a layer thickness of 2-3 mm (this is not typing 2-3 mm), you can save a lot of resources for this type of work.

How thick should be floor screed

Maximum and minimum thickness of screeds

How thick should be floor screed

The maximum and minimum thickness of the floor screed - these indicators are worrying for many who intend to fill the floors themselves, as in some cases overstatement of the norm can lead to exceptional conditions. For example, when we heat the floors on the balcony, we should not be too poor, because it seeks to make the floor higher than the space one, since no foundation can withstand the weight of the ingredient.

How thick should be floor screed

Minimum floor screed thickness, technological characteristics

For the exit from the floor to the room it is necessary to choose the most reliable and efficient technological method used for this room. The right choice will help to balance the floor and heat and sound insulation properties. A screed is used in the soil leveling structure. Scrubbing is a floor layer, on which later flooring is used: linoleum, parquet, laminate, etc. Usually buyers do not know what thickness the screed has to have and what materials are used for laying the layers.

First fix the wallpaper or place the door

First fix the wallpaper or place the door

Options for door installation

Construction is a very precise field of activity that is subject to mathematical calculations and engineering calculations. Even a slight deviation is unacceptable, since it can affect design parameters - reliability, safety, durability and consumer properties. However, there are also issues in the construction industry for which it is not usual to give unequivocal answers. For example, the first wallpapers or doors? In what order is the job? Look at the Internet and see for yourself - everyone makes recommendations that are directly opposite to what the previous commentator said and without any arguments. We decided to sort the issue and weigh the pros and cons, then present the material to the reader.

First fix the wallpaper or place the door

Comments

the doors are placed on the final phase of the work, especially the team of installers is supposed to be with an industrial vacuum cleaner, it was given earlier - wrap them in cellophane, in any case the last part.

First fix the wallpaper or place the door

The sequence of the door installation

you need to put a door, otherwise it will not be possible to trim the wall with cash, especially if the door is mounted on a hidden springs or the thickness of the wall is thicker than the double box, you need to make the slopes

What is the first door or laminate?

When carrying out construction or repair work, it is very important to take into account the proper sequence of their implementation. Otherwise, you may already be damaged or stained. An incorrect work order can make the next step more difficult. If you want to install a laminate, hang the inner doors and adhere to the wall with the background, how to properly perform these actions?

First fix the wallpaper or place the door

What should be during the repair: the background or the door

We will consider this situation more seriously. Almost everyone knows that in the area covered with wallpapers, the level of humidity is increasing dramatically. However, this process does not allow drafts. If you intend to change the front door, the question of what to do in the first place can confuse many. In fact, the lack of a door can lead to such an unwanted draft. However, this problem is solved by banal closing of all windows. In this case, the entrance door is trying to open as rarely as possible.

Sound insulation ceiling materials

Sound insulation of the ceiling in the apartment

The efficiency of the ZIPS boards depends on the thickness and design of the vibrations nodes. The main features of the ZIPS systems - thickness and efficiency are shown in Table 1. Take care! Indices of additional insulation of IPS panels are designated for the design of the base floor with its own insulation of 50 dB. It is very important to determine the sound insulation of the ceiling on which the tests of additional insulation structures have been carried out, since it is much easier to add 10-15 dB on load-bearing structures with its own insulation less than 40 dB, which are used by some unscrupulous producers.

Sound insulation ceiling materials

All about installation and repairs
Do it yourself yourself

Owners, in agreement with their apartments, are trying to ensure the maximum comfort of life. Many modern buildings do not differ in sound insulation (houses 80-90 years can not boast). Therefore, certain measures are taken to create a noisy isolation of the dwelling. In this case, you need to pay attention not only to the walls, because the sound insulation for the ceiling is very important.

Sound insulation ceiling materials

Sound insulation of the ceiling in the apartment

We also point out that there is a third, often the most successful option for sound insulation of the ceiling in the apartment - sound insulation of the floor from the nearby on the top. Unfortunately, this option is often not used for objective reasons. At the same time, it must be acknowledged that it is significantly cheaper and to protect it from the impact of noise, it is also much more effective. Therefore, if your neighbor is ready to meet you and with the current SNiP noise protection, we advise you to solve the problem with your problem.

Sound insulation ceiling materials

Sound insulation materials

Super efficient system for existing walls. Sound insulation coefficient 59-62 dB. If you need the highest sound insulation between spaces - this system is ideal for you. Click here for more information.

Sound insulation ceiling materials

How to make a sound insulation of a ceiling in a dormitory under a suspended ceiling with your own hands

Upon completion of the application, you will be contacted by an authorized partner for the installation of thermal insulation to clarify the details of the project.