How to insulate the wall from the inside

How to insulate the wall from the inside

Wall housings - internal thermal insulation

Building a house will be an important operation, such as thermal insulation for walls. In some cases, for example, if a house is built from blocks of blocks and you still need to execute outer walls, the insulation of the house from the inside will not be so useful in terms of labor costs as insulation from the outside. Thermal insulation made outside allows saving space in the rooms. If the walls of the house are made of brick, it does not make sense to spoil the appearance of the building. In this case, the insulation of the house from the inside can be considered a good option - the exterior of the building will not suffer. In principle, the same methods are used to create internal insulations as outside, except with some differences.

How to insulate the wall from the inside

How to warm the house blocks inside and outside

The use of the pad in the construction of buildings is economically advantageous and the size of the material elements is allowed to achieve high speed of the building wall of the house. But due to insufficient thermal insulation properties and the potential for loss of power under the influence of critical temperatures, it is necessary to perform thermal insulation, which will help to achieve the required level of durability of the building and the ability to accumulate the heat of the building.

How to insulate the wall from the inside

Assistant for anyone who builds or repairs a house / apartment.

Consider the question of whether there is a difference in how to isolate the walls from the inside (with some isolation and under what schematic), or help to prevent the consequences. This part is the result of such "internal warming myths":

What is better to insulate inside the extension block?

I build a house, I do not know what to warm in the interior, I started to isolate with the insole, and the walls started wet at the top of the foam. Maybe because something outside is not coated. Now you have to decide how to do it right. Will I get out of the outside, will the walls stop wetting? Is there a reason for something else? Explain.

How to insulate the wall from the inside

When the house is insulated from the inside, the interior space of the room is significantly reduced. However, this fact is not essential for the complete abandonment of the insulation and in cold weather suffers from low temperatures outside the windows or to throw money into the chimney to heat the house.

Types of brick furnaces

Types of brick furnaces

What types of brick house furnaces can you choose for building?

Are you interested in the brick stove, but do not know what to choose for a private household? I'll tell you what the furnaces are for the house and the bath. I will also sign the difference between the various heating constructions built from refractory bricks.

Types of brick furnaces

Types of brick furnaces for the home

Low-cost and expensive boilers of various modifications operating on various fuels have greatly facilitated human life. It's not easier than switching on a boiler in the late fall, setting the way and enjoying the heat in the cold season. A strange but traditional Russian stove, which is so difficult to maintain, will not give up the situation. It has been proven for centuries as the main heating device in the country, in rural areas and in the houses. In addition to serving as a real decoration of the house, it allows not only heating the room, but also heating the bed, water and food preparation. What are the types of brick furnaces for the house, how they differ - in our article.

Types of brick furnaces

Brick for home

The appearance of boilers of various modifications has made it possible for the heating systems of the houses to be efficient and comfortable to operate. But also the baked oven does not intend to become a forgotten archaism. And today there are many people who want to decorate their home with such a design. This "sweetheart" of the apartment will give you warmth, give you a delicious meal, bring the house unique comfort, they can not produce metal structures. There are several types of furnaces, which allows for complete choice, taking into account the purpose of the structure, the area of ​​the house.

Overview of Russian brick furnaces for the home

Of the cities, the problem of heating is acute. The comfort of life and human health depend on its solution. Most brick stoves not only warm the air, but also allow cooking. In order to maintain optimum air temperature, 1-2 channels per day are sufficient.

osnovaremonta.ru

Of course, you know that the types of furnaces are different, our website includes "Swede", "Galandka", "Baby", "Heating and cooking", "Grinding with a fireplace". Taking into account several basic parameters with which it is appropriate to sort the furnace types.

Refund increases the value of fixed assets

Refund increases the value of fixed assets

Accounting for repairs and improvements to own fixed assets

Fixed assets are permanent assets. During operation, fixed assets (OS) are somehow worn out, so they need to be repaired or improved. How to calculate such operations? We will talk about this in the opening article of today's issue.

Refund increases the value of fixed assets

Last come

The company plans to start a major renovation of the building (block roof, replace windows, repeat heating). The repairs will be carried out by the contractor and the company's own efforts. How to reflect this repair in accounting and tax accounting? Do I have to make a decision to withdraw a fixed asset from a business?

Refund increases the value of fixed assets

ACCOUNTING ACCOUNTING COSTS OF THE FIXED ASSET

TR management involves the implementation of minor works: in relation to the repair or partial replacement of individual parts of OS objects in order to maintain them in working order. Such repairs do not increase the benefits that were planned using a repaired item. Therefore, the costs for this are not included in the cost of the fixed asset (not capitalized) but are included in expense in the period (Dt 91, 92, 93, 94, depending on the scope). TR can be performed both independently and by the performer. Practically every company that has a building in its balance sheet faces the need for maintenance, maintenance and repair costs. In the consultation, we will examine how to properly evaluate these costs and reflect them in the company's accounting and taxation. We assure all our clients: high quality of service and trust in a positive result, understanding the specificity and individuality of each of your questions; optimal cost of services; complete security of personal and commercial information. If the capital repair increases the value of the fixed asset (hereinafter referred to as the OS), it will become clear if we will refer to Accounting Regulation 6/01, "Accounting of Assets", approved by Resolution no. 26n of the Ministry of Finance of the Russian Federation of 30 March 2001 and also the Tax Code of the Russian Federation. In our paper we will answer this question.

Pool ekaterinburg uralmash

Pool ekaterinburg uralmash

Sports Complex "Uralmash"

Warning: All visitors over the age of 16 must check the healthcare workers in the pool and receive a permission to visit FREE. The transition is valid for three months. Children (under the age of 16) need the help of a pediatrician. If you want to visit a small pool, you need an analysis result for enterobioz for 10 days. You can take an overview from the first to the last meeting every day!

Pool ekaterinburg uralmash

Bazeni in Uralmash

Ekaterinburg pool Uralmash operates in the same area at the following address: Festivalnaya street, building 8. The doors of the complex are open from 08:00 until 20:00. This schedule is important on weekdays and on Saturdays. On the last day of the week, Uralmash is open from 10 am to 4 pm. Heating is done every 45 minutes.

What to do?

Based on "pool Uralmash Yekaterinburg" you can swim or learn to swim. There is also a sports swimming section. Swimming pool dimensions: 25 to 13 meters.

Uralmash swimming pool: cene

The cost of the visit depends on the day and the time of the swim. Thus, the adult ticket for workdays varies from 90 rubles to the maximum of 160 rubles (meeting from 18.00 to 20.00). Baby ticket these days costs from 70 to 90 rubles. At the end of the week - from 130 to 160 rubles. Monthly subscription will cost you 300-500 rubles.

Sometimes Uralmash

Two pools: large and small

Uralmash Pool is one of the first sports and recreational facilities in Yekaterinburg. It is characterized by a wide range of activities - both for younger visitors and for adults who want to learn how to swim, improve their health, or simply get live vivacity.

Pool ekaterinburg uralmash

What happened?

Good day! I was bitter because of the fact that yesterday, March 10, 2014, at 13-15 hours, after all grandmothers, the girls came 8-9 years old, aged 13-16. None of them tried to take soap and sponges. Dressed ...

Pool ekaterinburg uralmash

Bazeni in Ekaterinburg. Season 2017/2018

Two years ago the prices of the visited databases changed without recognition. They increased everywhere, and in some places the costs increased by as much as 150 rubles. This year, there are minor price changes, not all swimming pools.

Floor in a private house on the first floor

Floor in a private house on the first floor

Ground floor of a private house without a cellar

In homes without a basement, the ground floor is a popular solution for all rooms on the ground floor. Soil on the floor - cheap, simple and easy to carry, it is also convenient to arrange in the basement, garages, bathrooms and other auxiliary rooms. Simple design, use of modern materials, laying in underfloor heating (heated floors), allow such floors comfortable and attractive in price.

Floor in a private house on the first floor

Device floor in a house with no basement

The most common version of basic appliances for small private houses, where there is no foundation for the tape (no basement) and the floors are created directly on the available floor. So they work where there is no danger of a high state of groundwater, and the relief zone is homogeneous, lying approximately at the same level of the horizon. If the land is located under a large slope, humidity in the ground is excessive during the year, therefore it makes sense that the cellar is on the first floor of the house at a distance from the ground, making the ventilation space between them. The features of the two options on the floor in private houses will be discussed in this article.

Floor in a private house on the first floor

Materials

Modern technology is developing rapidly. The construction sphere did not cost. Therefore, the current building materials market in Russia can offer customers a number of thermal insulation materials with their own advantages and disadvantages.

Floor in a private house on the first floor

The bottom of the device in houses without basements: on the floor or above the ground? Schemes

In most cases, this solution is the cheapest, easiest and easiest; however, certain principles should be taken into account:
• carefully sand sand or crushed stone;
• takes care of the concrete in achieving its structural strength;
• conduct waterproofing and connect it with horizontal insulation of the base walls;
• carefully insulate the floor and foundation walls;
• do not reduce the thickness of the layers specified in the project.

Floor in a private house on the first floor

How and what to isolate the floors on the first floor

So it was comfortable and comfortable in your home, the pleasant climate was over, you are thinking about the high quality insulation of the first floor. After all, the heat going into the ground must be restored by incineration of excess fuel. This includes cost savings that can be saved.

Heating of concrete floor from polystyrene foam

Heating of concrete floor from polystyrene foam

Floor polystyrene insulation

Extended polystyrene is a gas-filled material derived from polystyrene and styrene copolymers. The filled styrene granules are dissolved in the mass of the polymer with gas, and then the mass is heated by steam, which causes the initial granules to multiply. The granules take the form of blocks and they sinter with each other. Using this technology, we get expanded polystyrene.

Heating of concrete floor from polystyrene foam

Floor heating with polystyrene foam: an analysis of three popular situations in weather conditions

Soil insulation is an obvious need. This is justified by economic calculations and the desire to provide favorable microclimate conditions, both in apartments of high buildings and in autonomous low-rise buildings. Soil insulation will reduce heat loss and eliminate the causes of many diseases associated with hypothermia. Increase the thermal properties of the walls with the help of various materials and laying schemes, where the insulation of the floor with an expanded polystyrene is not the last.

Heating of concrete floor from polystyrene foam

Heating of concrete floors with extruded polystyrene foam

The cost of heating depends to a large extent on how well the house is isolated. Particular attention should be paid to the concrete bottom, which is known to be the coldest. There are a lot of materials that can be used for thermal insulation, and in recent years, an increasingly extruded polystyrene foam (also called extrusion) has become an increasingly popular.

Heating of concrete floor from polystyrene foam

Floor polystyrene insulation

To ensure maximum comfort in the house, care should be taken not only of thermal insulation of the walls, but also for the insulation of the floor. Today, there is a mass of heating materials, but it is perhaps the most effective for polystyrene foam. Soil heating with expanded polystyrene is a fairly simple process, which, however, allows you to warm your home. In addition, this material is not flammable and environmentally friendly.

Heating of concrete floor from polystyrene foam

High-quality floor insulation

Ideal foam polystyrene foam construction materials are used to regulate heated floor coverings with technology. They face two problems at the same time: they do not leave moisture and steam and provide good thermal insulation.

Wall insulation from the inside

Wall insulation from the inside

Assistant for anyone who builds or repairs a house / apartment.

Consider the question of whether there is a difference in how to isolate the walls from the inside (with some isolation and under what schematic), or help to prevent the consequences. This part is the result of such "internal warming myths":

Wall insulation from the inside

Do they insulate the walls from the inside?

Keep new building materials made up of several layers, well maintained. The houses built from them are much cheaper to maintain than buildings in the Soviet Union, built of brick or reinforced concrete slabs. This is especially noticeable during the heating season - for a house built of modern materials, the required heat carrier will be significantly less. But after all, nobody will break down most of the old Soviet houses, and many of us live in them. So today we are discussing how to isolate walls from the interior of such a building or any other building and how to do it properly.

Wall insulation from the inside

Wall insulation from the inside. How To Heat The Wall From The Inside

Consider the question of whether there is a difference in how to isolate the walls from the inside (with some isolation and under what schematic), or help to prevent the consequences. This part is the result of such "internal warming myths":

Wall insulation from the inside

In which cases can the walls be heated from the inside?

If it is cold and damp in a dwelling or house in winter or you have to pay huge amounts of heating, then it becomes clear that there is a clear reason why heat does not stay in the room. The simplest and most logical at first glance is to become wall insulation. The most common in the minds of the average person is the insulation of the wall with their own hands connected with the interior decoration. However, in most cases, such conclusions are irrational and even hasty.

Wall insulation from the inside

Isolation of a private house from inside: which insulation is better and safer?

If you read this article, this means that the outer isolation of your home is not enough or problematic. In it we will talk about the isolation of the walls of the house from the inside, about its advantages and disadvantages, about various materials, and we offer a number of tips on choosing and working with this or that isolation.

Selling houses in the village in Tatarstan

Selling houses in the village in Tatarstan

6 500 000 RUB.

For sale 2-storey residential building with land of 4.86 hectares. In the house on the 1st floor 1 living room 25.2m2, kitchen 14m2, toilet, bathroom, dressing room 12m2, large hallway. The total area of ​​the 1st floor is 80m2. On the second floor there are 3 living rooms / 18,8 + 15,1 + 11,7m2 /

Selling houses in the village in Tatarstan

Sale of houses and land, Kazan, Republic of Tatarstan

Currently the real estate market represents a wide range houses. You can buy a mansion, Townhouse, you can explore the option buying a modern hut, you can buy a house in a cottage or buy a house in the village. The price of a private house depends on a number of parameters: in the area of ​​the house, on the plot, in the area where it is located.

House: 80 m & sup2, plot 17 st.

I sell a house of 80 m2 Plot 17 acres (LPH) Vysokogorsky district, village Novye Biryuli st. Green, brick house. Gas, electricity, water in the house! There is a brick garage, a livestock hut in the area. Bath in place! ...

Latest Articles

The website of Apartments-houses.rf is dedicated to the real estate market in Russia. We strive to create a professional but simple, intuitive and free tool that will be an indispensable assistant for the buyer and seller of real estate.

Search Form

I sell a house of 80 m2 Plot 17 acres (LPH) Vysokogorsky district, village Novye Biryuli st. Green, brick house. Gas, electricity, water in the house! There is a brick garage, a livestock hut in the area. Bath on the site! ... I am selling a land of 18.3 acres in the village of Bolshie Berezi, Street building, Atninsky District, Nizhnebereskinskoye rural settlement. Gas, electricity, water, everything is close. In the village there is a garden and a school. Street residential areas covering the gravel. Cadastre code: 16: 10: 040303: 99. Call!

If you want to receive new ads by mail for a request "Homes for sale in the village of Kirby in the area of ​​Laishevsky".

Severny, Aviastroitelny district, st. Kamyshinsky- house for sale from log + brick extension of 86 square meters m in very good condition. The house is light and warm. All communication in the house: bathroom, electricity, gas, central water; septic tank, heating AOGV. The area of ​​the area is 5.5 acres, flat, with plantations. The square is square, fenced ...

Concrete methods in winter conditions

Concrete methods in winter conditions

Wintering in winter: methods, characteristics, necessary measures

When you need winter concrete, the main problem is low ambient temperature, which leads to the freezing of building materials. Accordingly, wintering technology is intended to prevent the freezing of water and other materials.

Concrete methods in winter conditions

Concreteing in winter conditions. For the rule

The essence of the method is that concrete cooling at 0 ° C can gain critical power during this time. Depending on this, determine the thickness and type of insulating coating material. With this method, the concrete mixture with a temperature of 20-80 ° C is placed in heated sheathing and the open surfaces are protected against cooling. Heating is not necessary because the amount of heat that is introduced into the preparation into the mixture and released during the cement interaction with water is sufficient for hardening and a critical strength set. This method is used for the concreting of massive structures. The mass index is estimated with the surface module.

Concrete methods in winter conditions

Winter concrete methods

Existing methods of winter concreting are divided into two main groups: non-aggressive cementation of concrete and artificial heating of concrete from monolithic structures. Methods of concrete paving with artificial heating do not allow continuous work in winter conditions, but also intensifying the process of building concrete with concrete, reducing the construction time and increasing the level of the formwork transport.

Concrete methods in winter conditions

Concrete treatment in winter conditions: thermos, heating with electricity and infrared radiation

If in winter conditions it is necessary to make concreting, they become the main problem of low temperature, which makes construction materials frost. According to SNiP 3.03.1, the conditions of winter concrete are below 5 degrees Celsius.

Concrete methods in winter conditions

How to Concrete In Winter

And if the low positive temperature slows down the setting process and the strength of the concrete, then it stops completely negatively. The reason for this is the freezing of water in young concrete. The process of hydrating the cement is not possible in the absence of water. Water is a necessary component for the formation of cement stone. Cement must be in contact with water (moisture) throughout the aging period.

Thermal site

Thermal site. Heating and facade decoration of the house

The thermal side is a material for the outer coating of buildings with high thermal properties. It also has a nice look. For example, the heat side under the brick of the house will not only be heat, but also textured aesthetics.

Characteristics of PP heat side

Mix foam with an extruded polystyrene foam. The foam is permeable to steam, but not as a wool, of course your gas silicate block and even wood do not need such a permeability of steam as the wool has. which is ten times lower than the watt, while in the permeability of the polystyrene, the vapor permeability is almost equal to the permeability of the vapor g / s of the block and the removal of vapors will be uniform. If it is easy to explain, the vapor permeability of the cotton wool is on the 10-point scale 7, and the g / s block is 3, then the layer of plaster and decorative paint with a color that also has vapor permeability 3. Question: Why is two pairs of permeable materials good permissible steam?

Thermal site

the location of popular favorites

This website is informative and in no case is the public offer provided for by the provisions of Article 407 of the Civil Code of the Republic of Belarus. The website is not used as an online store, including for courier trading, according to the samples.

Thermal site

You are here

Decorative facade elements - a way to change and choose your home from many buildings. With their help you can isolate the façade, change the architectural features of the house and protect the house from heat and cold.

We will create composite elements of any complexity. This is a great way to realize your ideas. Columns, bows, pavements and pilasters - both decorative elements of the facade will unrecognizably transform the house from the outside and from the inside.

Thermal site

Interface service

Buy and sell only in your city.
When you receive goods of your quality, you should take a certificate from your seller and change your passport information.
Transfer of advances for "seized" laptops, phones, etc.
"Barahla.net" never participates in transactions and therefore provides nothing to buyers and sellers.