The frame house is poor

Typical weaknesses of framework houses

It is therefore crucial to take into account all the nuances of technology. The skeleton scheme is calculated on the basis of the understanding of the load, the calculation of the elasticity and other technical properties of the material used, and for stability and durability, the highest accuracy is required when connecting each part. When placing, for example, brick construction, it is becoming more and more simple, since the brick has a more primitive structure. In this regard, the technology of building wooden houses is even clearer.

The frame house is poor

Framework house - strengths and weaknesses

The construction house is today the fastest growing technology for building construction, especially for private developers. This is due to the many advantages of lightweight, prefabricated houses, while the development of building technologies of monolithic buildings has gradually been exhausted. The development of the frame technology continues today and attracts more and more fans.

The frame house is poor

Advantages and disadvantages of framework houses

Such technologies have been actively used in the West for the construction of civil engineering for over a century. They have become relatively popular in our country recently. Naturally, similar technologies have been known in our country recently, but it was difficult to assume that the domestic methods of frame construction in the confluence are technological and functional during the Soviet era. In people of similar construction they received the name of the houses "zasypny". It is the use of slag, sawdust or a mixture of them as a heater in such frame structures.

What are the weaknesses of the framework houses?

Save the will and operation of the house - for heating. The walls are almost entirely made of insulation and therefore have excellent thermal insulation. This will be a plus in the summer heat: the same layer of insulation prevents the heat from entering the house.

The frame house is poor

To draw attention to the shortcomings of monolithic frameworks (and advantages, if any).

This is a big mistake, since in fact the modern prefabricated house is comfortable, durable and beautiful. Today there are technologies that enable you to build a cheap and well-designed house of wood materials in a very short time - from a few months to a few days. We are talking about the technologies of panel frames.

Wooden windows st petersburg Finnish technology

Wooden windows st petersburg Finnish technology

Finland windows in Petersburg

Scandinavian windows have the highest thermal and acoustic insulation capacity, not least because of their unique design. As a rule, they are made of high-strength wood that will tolerate weather problems. Another undeniable advantage of Finnish wooden windows over plastic and other types of windows is that they "breathe". This is possible not only because of the natural structure of the wooden material, but also because of the existence of a specially designed slot in the street contour of the compactor or ventilation valve, which is cut into the upper part of the windows. This valve helps to light fresh air in the air without traction, in summer and in winter.

Wooden windows st petersburg Finnish technology

Ask us or send a request to calculate the windows!

Scandinavian (Finnish) wooden windows are consisting of two successively mounted frames in a single design, i. e. two independent flaps that can be opened simultaneously with one handle and two or three perimeters of the seal. There is one glass in the back side of the street, and a single-skinned glass unit in the box on the side of the room. The locking accessory system is not completely hidden. The windows are opening inwards. These windows are most often made of the three most durable types of wood: larch, pine and oak (for more information on the windows of these types of wood, read the relevant sections). They are therefore resistant to negative environmental conditions.

Wooden windows st petersburg Finnish technology

Wooden windows Sokolka window of the Swedish concern INWIDO.

Skaala, one of the largest factories for the production of aluminum windows made of wood and wood, produced a unique wooden window model AlfaFrostFree on the Finnish internal market. To date, there is no analogue of this model among manufacturers of aluminum windows made of wood and wood.

Wooden windows st petersburg Finnish technology

Wooden windows and doors from Skaala

Scandinavian quality plus innovation is what Skaala embodies in our products. Skaala continues its roles, while creating the dynamism of today, with strict observance of the tradition and experience gained over the years.

Wooden windows st petersburg Finnish technology

Finnish wooden windows

The company "Oklandia" offers a good solution: wooden windows made according to Finnish technology. They do not have defects, they differ in functionality, the elegance of the surface. We can combine them with complex window elements.

Littering of thorns

Littering of thorns

How to choose a lawn

His name was given a good lawn because of the particularity of cultivation and laying. They are produced on specially prepared plots intended for sowing for two or three years and are under the strict supervision of experts. The plot is provided with timely care, the lawn is cut in time, watered, fertilized and filled, and the field thoroughly cleans the weeds.

Hard spread the lawn

There are two most common ways: "natural" and artificial. In the first variant, the soil is simply offset, then watered generously, numerous plants grow, some of which are later removed with simple weeds. This approach requires minimal costs, but the availability of fresh and necessary grasses is extremely difficult to guarantee, and this approach is more appropriate for public parks.

Technological process of lawn production: technology of cultivation, laying and storage of peat (products)

Tenax Radix, Tama-Net is an extruded polypropylene grid specially designed to produce high-quality grass in a shorter time. Using Radix, Tama-Net significantly reduces the time required to produce barrels. Radiks, Tama-Net - extremely light, but very strong plastic net. The plastic grid is just spread over the surface of the earth, and the seeds are at the top of the net. Then a thin layer of soil is placed on top and a normal production process starts. When the seeds are released, the roots and hardening parts are woven into a mesh that forms a uniform, strong structure. This ensures early cultivation of lawns, and therefore stronger soil is created. Radix, Tama-Net significantly reduces time and production costs, resulting in increased yields and productivity.

Littering of thorns
Littering of thorns

Cultivate your lawn with your own hands

If you want to create a lawn with your own hands, you will have to select the right area for it and select the required grass. If you want the lawn to grow from your house, it should be a decorative blend of red leaf and mead leaves.

And sejati

The main task of any kindergarten is the cultivation of healthy planting material, which is not possible without basic knowledge about the propagation characteristics of plants that determine the basic direction of the company ...

Bulk floor technology

Bulk floor technology

General technology of using self-leveling soils: what do you need to know when working with this base?

Do you like the completely smooth glossy floors that are often found today in various offices or cafes? Then we have good news: you can do this with your own hands - at home. And how exactly - this article will tell. Polymer floors in the room are poured only after all other assembly and finishing works have been completed. At that time, you can make self-leveling floors from already prepared blends - today you can buy them in any hardware. It is important that you follow as closely as possible the instructions that accompany them.

Bulk floor technology

Bulk surface: application technology, types of self-leveling floors, the main fault in the floor of the device

In bulk, the name is adopted for a wide variety of materials used in bulk and used to protect the substrate of the soil (concrete, cement sand and other types of surfaces), the main purpose of which is to level the surface on which the floor is laid. Because of the specificity of the production of the panels, which are the basis for the floors in the panel houses, on the one hand they are smooth, those that will be the ceiling of the lower apartment. The soil that will be ground is always uneven, with hills and depressions, which is not uncommon with the ends of metal reinforcing bars that stand out with it, and sometimes with significant differences between the ground (up to 10 cm). On such surface it is impossible to install a high quality coating, either linoleum, laminate or parquet.

Bulk floor technology

A technology that spills the self-leveling floor

The technology of filling the floor cover does not release any errors. And even if you intend to self-level the floors yourself, be professional, join this process with full responsibility. "No need to invent a bicycle" has long been invented, all you have to do is to take account of the above article, which you optimize step by step.

Bulk floor technology

Self-leveling soil technology with sample

Methyl methacrylate can be used in industrial and civil engineering installations: aviation and automotive, instrumental, heavy, light, electronic, food and pharmaceutical, in commercial companies and warehouse complexes, in sports facilities.

The base of porcelain from the stone

The base of porcelain from the stone

Facing the basement panels

The base of any structure is gradually destroyed due to moisture penetration and temperature changes. Therefore, only with the porcelain pots cellar, reliable external protection will be guaranteed against all types of negative effects. We find out what kind of material is what characteristics are different and how the ceramic granite lining is made.

The base of porcelain from the stone

Porcelain pot lining - advantages and disadvantages of such a conclusion

In the construction of any construction (especially houses), the basement has a very serious role. Many functional tasks are assigned in this part of the building. However, the surface of the base, as well as the overall structure in general, is required to perform finishing works - this is an important point that the builder can understand. But there is a perfectly justified question - which materials are suitable for such a task? Today, it is very often faced with porcelain potters.

The base of porcelain from the stone

Decorating cellar house ceramics

Facing the cellar in the house takes place immediately after the completion of the main construction work. For decoration different materials are used which are more or less suitable for covering the cellar from moisture, soil and weather conditions. When choosing finishing material, it is worth considering the possibility of porcelain skiving for the falcon. In recent years, its aesthetic appeal and high efficiency have been increasingly used.

The base of porcelain from the stone

Final technology of ceramic granite

Porcelain tiles are not cheap materials. It looks rich. Divide them onto the base and stairs. Mounted for insulation. The heat is great. For installation, use Perfekta® adhesive "CERAMOGRANITE". Uhl 3 kg of adhesive per square meter. It's not cheap but reliable.

The base of porcelain from the stone

Prices of services

The surface of this type looks spectacular, but at the same time it is quite expensive. It is most commonly made of sandstone or limestone, although it is based on granite or marble. The tiles can be various, from small elements that are similar to the size of bricks, to large plates with a width equal to the height of the base. The tile differs in different accounts: it happens smoothly with a polished or polished surface, including a granular surface and even ruins.

Polymer floor technology

Polymer floor technology

Everything you wanted to know about polymeric floors: analysis of shades in bulk

Bulk polymeric soils are also called "liquid linoleum" - so comfortable to use. This is a new word in the interior, as well as a worship service for industrial premises. All internal additional visual volume due to soft gloss and smooth surface. Minimal shrinkage, high elasticity and modern aesthetics - thanks to which the properties of polymeric soils are now becoming more and more popular in the CIS countries, while abroad they have been in the market for a long time.

Polymer floor technology

Callback

Self-leveling systems based on liquid binders are floor-level self-leveling floors. The secret of technology is that the blend is not viscous, it spreads well over the surface, so the coating is exactly the same. In order to better understand what can be encountered in the repair, we suggest that you read the article on the polymeric floor device.

Polymer floor technology

Samonivelirna tal tal

Very important! When filling the filler, use self-leveling floor only from one batch (marked on the label).
When ordering, indicate separately the amount of material to be carried out on the bulk.

Polymer floor technology

Products

As the name suggests, this category of industrial floor coverings includes self-leveling systems based on liquid polymer binders which, due to their low viscosity, are distributed to the surface of the substrate and form a smooth and smooth coating due to polymerization. In order to avoid confusion, they need to be distinguished from dry sand-cement mixtures with water with various polymeric additives, often called "self-leveling floors", although not such, but serve as leveling screeds for linoleum flooring, laminate, etc. or to repair concrete floors.

Polymer floor technology

Polymer flooring technology

Gender is the most important part of each room, which must meet different requirements. Each of us, who is thinking about the floor, wants it to be permanent, practical, uninterrupted, resistant to all types of influences. Polymer flooring is a popular trend of our time, which has, in addition to these properties, many additional advantages.

Samonivelirna tal tal

Samonivelirna tal tal

General technology of using self-leveling soils: what do you need to know when working with this base?

Do you like the completely smooth glossy floors that are often found today in various offices or cafes? Then we have good news: you can do this with your own hands - at home. And how exactly - this article will tell. Polymer floors in the room are poured only after all other assembly and finishing works have been completed. At that time, you can make self-leveling floors from already prepared blends - today you can buy them in any hardware. It is important that you follow as closely as possible the instructions that accompany them.

Samonivelirna tal tal
Samonivelirna tal tal

A technology that spills the self-leveling floor

The technology of filling the floor cover does not release any errors. And even if you intend to self-level the floors yourself, be professional, join this process with full responsibility. "No need to invent a bicycle" has long been invented, all you have to do is to take account of the above article, which you optimize step by step.

Samonivelirna tal tal

List of tools and materials

Methyl methacrylate can be used in industrial and civil engineering installations: aviation and automotive, instrumental, heavy, light, electronic, food and pharmaceutical, in commercial companies and warehouse complexes, in sports facilities.

Samonivelirna tal tal

Bulk surface: application technology, types of self-leveling floors, the main fault in the floor of the device

In bulk, the name is adopted for a wide variety of materials used in bulk and used to protect the substrate of the soil (concrete, cement sand and other types of surfaces), the main purpose of which is to level the surface on which the floor is laid. Because of the specificity of the production of the panels, which are the basis for the floors in the panel houses, on the one hand they are smooth, those that will be the ceiling of the lower apartment. The soil that will be ground is always uneven, with hills and depressions, which is not uncommon with the ends of metal reinforcing bars that stand out with it, and sometimes with significant differences between the ground (up to 10 cm). On such surface it is impossible to install a high quality coating, either linoleum, laminate or parquet.

Plasterboard plaster for aerated concrete

Plasterboard plaster for aerated concrete

Plasterboard plaster

The problem of the permeability of the plaster pairs occurs at the end of the aerated concrete. For such walls, vapor permeability is the most important feature of the final coating, since the gas concrete is the material of the open pore (respiratory material) and is moistened in the form of steam, after it is enabled on the one hand in the gas concrete to completely exit the other side.

Plasterboard plaster for aerated concrete

How is plaster plaster used for carbonated concrete?

What is the difference between mixtures of plaster for aerated concrete?

Firefighter, as a material, appeared a hundred years ago. However, in our construction market, mass-access with the aerosystem of concrete has been introduced much later.

Plasterboard plaster for aerated concrete

Facade omet

AEROC gypsum facade refers to the thin-layer methods of finishing the outer surface of aerated concrete.
Its composition is specially selected for the special characteristics of wall structures with autoclaved concrete concrete, which finally allow the developer to obtain reliable, permanent protection and saving on the cost of finishing.
White decorative plaster.
The main thing is to interfere with external walls on thermal insulation systems, concrete surfaces, gypsum plaster, gypsum surface.
Designed for indoor and outdoor manual processing.

Plasterboard plaster for aerated concrete

What kind of plaster is better for carbonated concrete?

Today, building materials such as concrete are often used in the construction of private houses and other buildings. The use of blocks of this material during the construction of buildings reduces construction time and significantly saves money. For the building to last longer, it is often used outside and outside plaster for aerated concrete. In this article, we will examine how and in what sort of order should such confronting work be.

Plasterboard plaster for aerated concrete

Choosing a solution for gypsum made of carbonated concrete, foam and gas silicate blocks

The private construction of light expanded clay aggregates, various porous gas and foam blocks, large-format gas-sized large silicate elements is becoming more and more popular for several reasons. However, the plasterboard technology of gypsum concrete is somewhat different from the methods of treating brick and wooden supports.

Mechanized minus estriha

Mechanized minus estriha

Advantages and disadvantages of semi-dry screed

Due to the minimal amount of water in the semi-dense screed, the cement-sanded mortar is not liquid, it can easily be pulled out, which significantly increases the speed of work. For example, with the screed device in the classic way, one team can spill 100 square meters per shift, while the same team is able to overflow 250-300 square meters of screed in a mechanized manner. At the end of the article you can see a video that reflects the benefits of the speed of work.

Mechanized minus estriha

Everything is right
warm soils

Conventional screeds are close to the M-300 and are still worn with cement at the top. So it's durable and lasts for decades, until it becomes sand.
Half dry - now almost sand. Which is slightly glued with cement. In 10-15 years instead of the screed will be almost a real sand.
And if the price is the same - is it worse?
In addition, you can make sound insulation of mineral wool and then pour the classic screed.

Mechanized minus estriha

Types of screeds. Pros and cons

The comfort of the room depends to a large extent on the quality of the floor. However, the classic screed technology is difficult and time-consuming - it takes about four weeks to dry the "wet" cement sand. Does the modern construction industry offer a better option?

Mechanized minus estriha

Floor surfaces - types of floor screed, advantages and disadvantages

Floor screed is an intermediate layer between the base and the main floor. Better that this is done, the more durable the floor will be in the room. In no case "storage" on the constituent materials can lead to the interruption of the formation of the screed, which can literally, in a few years, cause the floor to burst, on which intrusions and pits are formed. All this causes damage to the final coating (linoleum, laminate), the overall appearance of the room due to the uneven bottom becomes non-aesthetic.

Mechanized minus estriha

Disadvantages of dry flooring methods

The popularity of the semi-dry field is very simple, in a few words - simple, fast and reliable. Regarding the shortcomings of this technology, they appear under the influence of external factors, so there are still problems with its implementation. The remaining weaknesses of semi-dry floor screeds are myths that will help you to spray!

Glueing glass

Glueing glass

Wall wall for walls and ceilings for coloring: varieties and gluing

Choosing finishing materials for walls, many consumers prefer the background. And this is understandable, because it is to some extent a kind of classic, especially today's diversity is so great that it's easy to pick up some of your own. For example, glass fiber wallpaper (or glass wall). In this article, we will discuss how to glue the glass wallpaper to take pictures and determine the positive and negative pages of this material.

Glueing glass

How to Stick Paper Glass Wall. The color of the glass

Background from glass fabric - specially resistant and durable stylish decorative coating. This material is made of natural raw materials and is, in contrast to synthetic materials, safe for human health. If your walls are full of minor errors, it is your ideal choice of glass wall; how to stick, we will explain. It is surprising that, when choosing this type of material, pasting of wallpapers with their own hands is a relatively simple task.

Glueing glass

Glass fibers: how to glue

Can a newcomer deal with such expensive and popular material as glass wallpaper? How to glue the glass wall, what tools are needed for this, as well as the different nuances of this interesting process that will be examined in this article.

Glueing glass

Follow the social networking tips.

Glass fiber wallpapers are sold in rolls. This material, depending on its strength, can be coated on the surface before interference or imaging. This will reliably close wall defects (small cracks), increase the reliability of partition walls of relatively fragile material (dry walls, plywood, polystyrene foam). However, if you want to achieve a great result, you need to know how to properly glue the glass wall.

Glueing glass

Glass fiber bonding technology

For the production of glass wallpapers it is used as recyclable raw material of broken glass and sand. The glass mixture at a temperature above 1000 ° C is converted to a homogeneous mass and sent to a drum (spiner) where, under high centrifugal forces, molten material is pulled into filaments forming glass fibers.