How to hang a photograph of a chimney

How to hang a photograph of a chimney

Finishing work

When the construction of the brick is completed, it is necessary to cover the space between the roof and the chimney with non-combustible roof material in accordance with the building rules. To do this, make a protective apron.

How to hang a photograph of a chimney

Use of the floor profile as a reversed material for the chimney

Fireplaces can be exposed to various negative effects. These can be fluctuations in temperature or weather conditions of an aggressive nature. In the process of combustion of condensate in the chimney, it is destroyed. The formation of condensate is a consequence of the difference in temperature of the working pipe and air. Different impurities formed in the chimney lead to its destruction. In order to avoid such moments, the insulation of the chimney with the lining should be carried out. How to cover the chimney with a lining or other material, which option is cheaper and safer, from which the smoke linings are made?

How to hang a photograph of a chimney

Hermetic chimney - step by step. Photo

The protective apron of the chimney, made of a flexible tape, becomes two-layer across the entire perimeter. Below the tile is the bottom tape, and the top is placed on the roof cover. Both layers are tightly compressed and attached to the smoke walls and tiles. The edges of the upper ribbon strips are located on the chimney wall, covered with metal profiles.

Internal and external smoke pipes: a set of simple options for self-realization

In the living room the presence of the oven or fireplace is good, but it does not always occur inside the chimney. If this is your case, in this article you will learn how and with what kind of trimming the pipes in the house. And not only indoors, but also outside, so the whole structure meets contemporary architectural trends.

How to hang a photograph of a chimney

Chimney cover! Better and safer?

At least three types of pipes go to the roof of each house. These are chimneys (furnaces, fireplaces, heating equipment), ventilation (rooms with natural ventilation - bathrooms, kitchen, stoves, cellars, etc.) and ventilation of sanitary facilities. Finishing pipes on the roof means mandatory sealing of the joint between the roof and the vertical surface, protection of the pipe material and channel from the precipitation and, if necessary, the isolation of the chimney. Equally important is the aesthetic design of exits on the roof.