Installing a vinyl record on the device itself

Installing a vinyl record on the device itself

Installing vinyl siding - how to sheat the house with your own hands

Sheathe houses foreign news even. It's enough to know the procedure and some shades of installation. If you decide to choose a vinyl page as a coating material, custom installation is more than simple.

Selection and calculation of constituent materials

Installing a vinyl record on the device itself

The advantage of this type of material is that it does not require prior alignment of the walls. It is only enough to clean the surface against dirt or the previous coating, remove the protruding elements (pads, pads, drains, etc.).

Installation of wine pressure: video instructions for proper facade coating

Often amateur masters ask how to properly install vinyl siding. Video instructions for this simple but have a lot of tango, the process is in this article. The facade of the facade with such material has recently become more and more popular, but refining costs are often quite high. After examining the basic rules of coating and using a few tips, you can easily install the installation of the vinyl side with your own hands.

Installing a vinyl record on the device itself

Installing a vinyl record on the device itself

Among the main advantages of vinyl pressure, we can mention its lightness as a material, which is very important in assembly (on the second and third floors of construction scaffolds it is a material "lighter"), and it is more resistant to scratches, unlike metal sides of vinyl.

Installing a vinyl record on the device itself

Mount the frames of the openings

For the installation of the siding, if the project is, the amount of material and fixture it has accurately calculated can even be unprofessional. You will need: a pair of chips (simple and for cutting metal), ruler, hammer and height, Bulgarian, screwdriver, tape, water. Successfully installed sails will last for many years, despite the cold and heat. Installation help will be provided in our article on how to do DIY installation of the vinyl page. The working stages will be as follows: first, you must prepare the walls, then install the initial profile, isolate and install the main profile. In addition, we advise you to read about the installation of thermopeles with clinker plates and metal pages under the tree.