Traditional roof supports to the walls
The result is a very durable and fully sealed contact between the roof with different surfaces. This operation is more than 20 years old and works well in the range of -40 ° to + 75 °.
The roof of the corrugated floor does not always have a completely flat surface. It can face different heights in the form of pipes, walls, some other structures. Neighboring - the weak point of the corrugated roof. At places where adjacent roofs are located, there is a high probability that water comes into the formed gaps. This does not concern only profiled foils, but also roofing of all types.
Installation of the roof crossing on the vertical surface
On the roofs there is a line connecting the roof with a wall, a very important place. Snow, rain, small scrap, fallen leaves accumulate there. This causes damage to the insulation and penetration of moisture under the roof, and sometimes to the room, which means repair of the roof. Therefore, in order to avoid such problems, a reliable coupling assembly was installed along the connection line.
Arrangement adjacent to the corrugated roof
Dock roofing with a wall can be two types - at the top and the side. When decking the roof, you will probably have to face the problem of designing such building elements, such as chimneys, ventilation pipes, warehouses, roofs, walls. In such places, melt or rainwater is collected. In addition, in branches of garbage trash in the form of a leaf can branch branches. All this contributes to the accumulation of snow in the winter. Consequently, the load at the crossing is increased several times.
One of the important points in building a roof is to create a reliable hub located next to the wall to the wall. This is done at the intersection with a chimney or attic. If you do not pay enough attention to such hybrids or make them poorly, humidity, wrecks, snow accumulations and other factors will soon ruin the waterproofing layer and damage the structure as a whole. Let's look at the ways of the adjacent roof, depending on the material of the coating. Also consider the methods of high-quality waterproofing that will save the building from moisture and destruction.